RunCam Racer 2 – 1.8mm


FCn tai joystickin kautta ohjattavissa

1.8mm FOV160°

4:3 ja 16:9 superview valittavissa

Ei varastossa, vain jälkitoimituksena


RunCam Racer 2

AIO Switchable

  • 4:3
  • Widescreen
  • NTSC
  • PAL
  • Joystick Control
  • UART Control
Joystick Control & UART Control Switchable
The top left corner of the screen will shortly display the current control mode.
The default is Joystick control mode.
Short the two camera control pins
RunCam Racer 2
Then power on, camera will auto switch between the two modes
RunCam Racer 2 RunCam Racer 2
The mode can be saved after power off. After switching to the desired mode, please unplug the short-circuit cable.
UART Control works with Flight Controllers:
BetaFlight 3.3 or above / ButterFlight 3.4 or above / CleanFlight 2.2 or above / Kiss Flight RC36 or above


  • RunCam Racer 2
  • RunCam Racer 2
  • RunCam Racer 2 RunCam Racer 2


  • RunCam Racer 2
    1x Camera
  • RunCam Racer 2
    1x 1928 ABS bracket
  • RunCam Racer 2
    1x 6pin FPV silicone cable
  • RunCam Racer 2
    1x Set of screws
  • RunCam Racer 2
  • RunCam Racer 2
    1x Manual
Model RunCam Racer 2
Image Sensor Super WDR CMOS Sensor
Horizontal Resolution 700TVL
1.8mm FOV160° 2.1mm FOV 145°
Screen Format 4:3 / Widescreen Switchable
Signal System NTSC / PAL Switchable
Mirror/Flip Available
Integrated OSD Yes
One Touch Scene Setting Personal / Lightrax / Outdoor / Indoor / Cloudy / Twilight
S/N Ratio >50dB
Electronic Shutter Speed Auto
Min. Illumination 0.01Lux@1.2F
Day/Night Auto
Menu Control Joystick Control / UART Control Switchable
Power DC 5-36V
Current 110mA@5V / 40mA@12V
Housing Material ABS
Net Weight 5.5g
Dimensions L19mm*W19mm*H18mm



FOV 130° 2.5mm, FOV 150° 2.3mm, FOV 165° 2.1mm