Kuvaus
FlosStyle
5” ~85g (will be ~87g in the future)
Diagonal: 238mm
Sideways: 159mm
Front to back: 177mm
Features:
-
~85g built for 5”
-
Three 20×20 stack platforms side by side
-
Or one 30×30 with a 20×20 next to it
-
Arm screws have zero integration with any stacks
-
Stacks are completely independent from the core frame structure
-
Uses 5mm thick 6” and 7” arms from the Floss 2.1 as 5” and 6” arms respectively
-
Low and narrow top deck for managed CG and disk unloading
-
8mm long screws included for motor mounting on the 5mm arms (16 quantity)
-
Top and bottom body plates are the same, lower brace is different
-
27mm standoff spacing, micro cameras ONLY
-
20mm build height
-
GoPro mount platform same as Flowride and Floss series
-
Battery on top recommended but can also be underneith
-
All 12.9 hardness steel bolts
-
Open structure allows for easy build and maintenance
-
Robust motor bumpers
Kit includes:
2x Floss 2.1 boomerang arms in 5mm
2x FlosStyle body plate (same for top and bottom)
1x Lower bracing strut for under the arms.
5x M3x20mm 12.9 hardness
18x M3x8mm 12.9 hardness
10x M3x6mm 12.9 hardness
6x M3 flanged aluminum locknut (Gun metal)
5x M3x15mm aluminum knurled standoff (Gun metal)
5x M3x20mm aluminum knurled standoff (Gun metal)
2x M3x3mm nylon nut (Black)
16 of the 18 8mm screws are for your motors, the other two are for the bottom of the front standoffs if you choose to use the nylon nuts for extra camera wiggle room.